2Rows Alloy Radiator For 1990-1999 Toyota MR2 MR-2 SW20 2.0 REV1 REV2 REV3 TURBO

  
Material: Aluminium Core Size: 670mm x 308mm x 40mm Overall size: 756mm x 380mm x 115mm Inlet/Outlet: 32 /32 mm 2 Rows Of Tubes. Drain the radiator fluid into a suitable container.

Take off any plastic covers around the radiator. Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

Disconnect the radiator hoses from the radiator. Disconnect the transmission cooling lines from the bottom of the radiator. Remove any clamps, brackets, or screws holding the radiator inside its frame. Lift the radiator up and out of the car. Slide the new radiator into place. Connect any clamps or brackets that hold the radiator in place. Connect the transmission cooling lines carefully. Connect the engine cooling hoses to the radiator. Replace the fan and fan shroud.

Reconnect the fan electrical connection. Fill the radiator with fluid. Check your work to make sure that there are no leaks. (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan).

Note: Do please keep children and pets away when replacing the radiator. All our products are in high good quality, in rare case if an item received was damage or defective, please notify us within 7 days of receipt of it. We will do our best to solve it and satisfy you.

We will arrange for a eplacement to be sent as soon as the item is received by us. Very appreciated for your support. We will do our best to solve your problem as soon as possible. We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day! And we will do the same for you automatically! Thank you for your cooperation.